เครื่องใหม่

6
Yes
None
1
1000000
Search...
/new-machine/

New Machine

เครื่อง ซีเอ็นซี วายคัท อีดีเอ็ม ซุปเปอร์ดิล มิลลิ่ง กลึง เจียร CNC machine Wire Cut EDM milling lathe grinding etc.
Thumbnail
ค้นหาโดย

ประเภท

CNC Machining Center Vertical / Horizontal
A650 - A750 Linear Way
A650 - A750 Linear Way Image

A650 tratel X/Y/Z : 650*410*510 mm.

A1000 travel X/Y/Z : 750*460*540 mm.

WINNER CNC Machining Center

Features
  • Easy chip flow splash guard design.
  • High speed linear guide used on 3-axes of machine, accomplish super load capacity and rigidity.
  • The enhanced ribs in major construction parts provide the super rigidity for heavy duty cutting or for high speed cutting.
  • The heavy-duty linear guide way is applied in X, Y, and Z axes. It is free from loads deformation. High speed feed-rate and repeatability accuracy are guaranteed.
All WINNER’s VMC enable to do the variable type of A/D/E SERIES, which can be defined as below,
  • A/D/E SERIES.
  • A SERIES – X/Y/Z Linear guide ways.
  • D SERIES – X/Y/Z Box ways.
  • E SERIES – X/Y Linear Z-Box ways.
Specification
A850 - A1000 Linear Way
A850 - A1000 Linear Way Image

A850 tratel X/Y/Z : 850*560*560 mm.

A750 travel X/Y/Z : 1000*600*600 mm.

WINNER CNC Machining Center

Features
  • Easy chip flow splash guard design.
  • High speed linear guide used on 3-axes of machine, accomplish super load capacity and rigidity.
  • The enhanced ribs in major construction parts provide the super rigidity for heavy duty cutting or for high speed cutting.
  • The heavy-duty linear guide way is applied in X, Y, and Z axes. It is free from loads deformation. High speed feed-rate and repeatability accuracy are guaranteed.
All WINNER’s VMC enable to do the variable type of A/D/E SERIES, which can be defined as below,
  • A/D/E SERIES.
  • A SERIES – X/Y/Z Linear guide ways.
  • D SERIES – X/Y/Z Box ways.
  • E SERIES – X/Y Linear Z-Box ways.
Specification

 

D850 - D1000 Box Way
D850 - D1000 Box Way Image

A850 tratel X/Y/Z : 850*560*560 mm.

A750 travel X/Y/Z : 1000*560*560 mm.

WINNER CNC Machining Center

Features
  • Easy chip flow splash guard design.
  • High speed linear guide used on 3-axes of machine, accomplish super load capacity and rigidity.
  • The enhanced ribs in major construction parts provide the super rigidity for heavy duty cutting or for high speed cutting.
  • The heavy-duty linear guide way is applied in X, Y, and Z axes. It is free from loads deformation. High speed feed-rate and repeatability accuracy are guaranteed.
All WINNER’s VMC enable to do the variable type of A/D/E SERIES, which can be defined as below,
  • A/D/E SERIES.
  • A SERIES – X/Y/Z Linear guide ways.
  • D SERIES – X/Y/Z Box ways.
  • E SERIES – X/Y Linear Z-Box ways.
Specification
E1100 - E1300 Linear Way
E1100 - E1300 Linear Way Image

E1000 tratel X/Y/Z : 1000*600*600 mm.

E1300 travel X/Y/Z : 1300*700*700 mm.

WINNER CNC Machining Center

Features
  • Easy chip flow splash guard design.
  • High speed linear guide used on 3-axes of machine, accomplish super load capacity and rigidity.
  • The enhanced ribs in major construction parts provide the super rigidity for heavy duty cutting or for high speed cutting.
  • The heavy-duty linear guide way is applied in X, Y, and Z axes. It is free from loads deformation. High speed feed-rate and repeatability accuracy are guaranteed.
All WINNER’s VMC enable to do the variable type of A/D/E SERIES, which can be defined as below,
  • A/D/E SERIES.
  • A SERIES – X/Y/Z Linear guide ways.
  • D SERIES – X/Y/Z Box ways.
  • E SERIES – X/Y Linear Z-Box ways.
Specification
L1600 - L1800 Box Way
L1600 - L1800 Box Way Image

L16000 tratel X/Y/Z : 1600*720*760 mm.

L1800 travel X/Y/Z : 1800*900*800 mm.

WINNER CNC Machining Center

Features
  • Precision ground slide ways & Turcite-B coated on 3-axes for box way & gibs.
  • Counter-balance weight device or upgraded motor.
  • The spindle adopts super precision angular contact ball bearings. Spindle speed 8000rpm is standard.
  • Servo motor and high precision ballscrew are directly coupled in 3 axes.
  • Arm type Auto Tool Change magazine – 24 tools is standard equipment.
  • The major construction parts are based on super strong cast iron.
  • They are stable and precision-proved in structure.
  • Wide column structure. Wide base enhanced saddle and full supported workpiece structure all contribute to the ability for heavy duty machining.
  • High rigidity high precision. The enhanced ribs in major construction parts provide the super rigidity for heavy duty cutting.
  • Top quality well-ribbed castings, Finite Element Analysis (FEA) is used on each new casting to determine the size and location of all internal ribs ensuring high tensional stiffness and minimum vibration.
Cartridge Type Spindle
  • The heavy-duty spindle utilizes super strong bearings to allow heavy cutting. Oversized disk springs used to hold the tool in the spindle are tested for long life.
Chip Augers
  • Both sides chip augers designed as one-piece with machine base, which can deliver chips to machine back. The chip augers are incorporated with powerful coolant flushing device to handle chip removal efficiently.
All WINNER’s VMC enable to do the variable type of A/D/E SERIES, which can be defined as below,
  • A/D/E SERIES.
  • A SERIES – X/Y/Z Linear guide ways.
  • D SERIES – X/Y/Z Box ways.
  • E SERIES – X/Y Linear Z-Box ways.
Specification
AP-500 Tapping / Drilling
AP-500 Tapping / Drilling Image

AP-500 tratel X/Y/Z : 500*400*300 mm.

WINNER Tapping / Drilling CNC Machining Center

Features
  • Easy chip flow splash guard design.
  • High speed linear guide used on 3-axes of machine, accomplish super load capacity and rigidity.
  • The enhanced ribs in major construction parts provide the super rigidity for heavy duty cutting or for high speed cutting.
  • The heavy-duty linear guide way is applied in X, Y, and Z axes. It is free from loads deformation. High speed feed-rate and repeatability accuracy are guaranteed.
All WINNER’s VMC enable to do the variable type of A/D/E SERIES, which can be defined as below,
  • A/D/E SERIES.
  • A SERIES – X/Y/Z Linear guide ways.
  • D SERIES – X/Y/Z Box ways.
  • E SERIES – X/Y Linear Z-Box ways.
Specification
APC-500/APC-600 Tapping / Drilling
APC-500/APC-600 Tapping / Drilling Image

AP-500 tratel X/Y/Z : 500*400*300 mm.

WINNER Tapping / Drilling CNC Machining Center

Features
  • A space-saving, high-precision and high-performance two pallets change.
  • APC series with automatic pallet change can be applied to do complex machining such as milling, drilling, boring, reaming and facing operations etc.
  • Automatic Pallet Changers directly on the base; easy to install, good water resistance and to avoid waste of space.
  • APC (Automatic Pallet Changers) is best choice for precious modular production and product accuracy and machining high speed requirements
Specification
HSMC-600/800/1000
HSMC-600/800/1000 Image

HSMC tratel X/Y/Z : 600*600*380 mm.

HSMC tratel X/Y/Z : 800*600*480 mm.

HSMC tratel X/Y/Z : 1000*700*480 mm.

WINNER High speed CNC Machining Center

Features
Built-In type Spindle
  • Innovative spindle design can absolutely eliminate overhanging problems, providing the best Machining & Engraving Solutions.
Transmission system
  • Extra Heavy Duty Roller Type Linear Ways on X-Y-Z axes;
  • Class C3 high precision pretension ball screws incorporated with double nuts assure high transmission accuracy.
Strong Structure
  • Strong bridge type construction design with extra wide base, reduces the “rigidity displacement” while the spindle head is moving.
  • Also guarantees the accuracy of parts or mould machining .
Specification
Wire Cut
GE-43S
฿ 2,400,000฿ 1,890,000
Promotion
GE-43S Image

X/Y/Z : 400*300*220 mm.

เครื่องไวร์คัท AccuteX

GE series wire cut machine

Features:

-Best cost & performance ratio machine

-Cutting speed is superior to other competitors

-Y-axis is located on the base; X-axis is located on the top of Y-axis,which is suitable for precise mold cuttings with small/medium stroke.

-Machine structure was designed via Finite Element Analysis(FEA) with high rigidity.

-Direct motor drive in X/Y axes with high servo response.

GE-53S
GE-53S Image

X/Y/Z : 500*300*220 mm.

เครื่องไวร์คัท AccuteX

GE series wire cut machine

Features:

-Best cost & performance ratio machine

-Cutting speed is superior to other competitors

-Y-axis is located on the base; X-axis is located on the top of Y-axis,which is suitable for precise mold cuttings with small/medium stroke.

-Machine structure was designed via Finite Element Analysis(FEA) with high rigidity.

-Direct motor drive in X/Y axes with high servo response.

Specification

Max. Work Piece Size L x W x H (mm) 830 x 600 x 215
Max. Work Piece Weight (kg) 500
X x Y  stroke (mm) 500 x 300
U x V Stroke (mm) 60
 Z Stroke (mm) 220
Biggest immersion altitude 195
Wire Spool Weigh (kg) 10
Foot Print (mm) 2200 x 2400 x 1990
Machine Weight (kg) 2850
Water System Capacity (L) 708
GA-43AL
GA-43AL Image

X/Y/Z : 400*300*220 mm.

เครื่องไวร์คัท AccuteX

GA Series ออกแบบด้วยแนวคิดแบบ ลิเนียร์ มอเตอร์ เพื่อความเที่ยงตรง โต๊ะวางชิ้นงานรองรับด้วยฐานหล่อ

GA เหมาะสำหรับ ตัดชิ้นงาน แม่พิมพ์ความเที่ยงตรงสูง ระยะแกนขนาดเล็ก และกลาง

GA series has “Direct Force” design on the concept of X/Y axes linear guideway
blocks keep staying in straight line.
Working tabe is supported by casting bases. GA series is suitable for the
precision mold cutting within small / medium stroke.

Max. Work Piece Size L x W x H (mm) 880 x 630 x 215
Max. Work Piece Weight (kg) 400kg
X x Y stroke (mm) 400 x 300
U x V Stroke (mm) 60
Z Stroke (mm) 220
Max. Cutting Taper (mm) ±15˚ / H80mm
Max. Wire Spool Weigh (kg) 10
Foot Print (mm) W x D x H 2209 x 2402 x 1994
Water System Capacity (L) 570
Machine Weight (kg) 2800

(*) “A” stands for AWT optional function.
(*) “L” stands for linear motor optional function.

GA-53AL
GA-53AL Image

X/Y/Z : 500*300*220 mm.

เครื่องไวร์คัท AccuteX

GA Series ออกแบบด้วยแนวคิดแบบ ลิเนียร์ มอเตอร์ เพื่อความเที่ยงตรง โต๊ะวางชิ้นงานรองรับด้วยฐานหล่อ

GA เหมาะสำหรับ ตัดชิ้นงาน แม่พิมพ์ความเที่ยงตรงสูง ระยะแกนขนาดเล็ก และกลาง

GA series has “Direct Force” design on the concept of X/Y axes linear guideway
blocks keep staying in straight line.
Working tabe is supported by casting bases. GA series is suitable for the
precision mold cutting within small / medium stroke.

Max. Work Piece Size L x W x H (mm) 880 x 630 x 215
Max. Work Piece Weight (kg) 400kg
X x Y stroke (mm) 500 x 300
U x V Stroke (mm) 60
Z Stroke (mm) 220
Max. Cutting Taper (mm) ±15˚ / H80mm
Max. Wire Spool Weigh (kg) 10
Foot Print (mm) W x D x H 2209 x 2402 x 1994
Water System Capacity (L) 570
Machine Weight (kg) 2800

(*) “A” stands for AWT optional function.
(*) “L” stands for linear motor optional function.

AU-300i
AU-300i Image

X/Y/Z : 350*250*220 mm.

เครื่องไวร์คัท AccuteX

AU Series wire cut machine

เครื่องวายคัท ประสิทธิภาพสูง การตัดชิ้นงานวายคัทที่รวดเร็ว รองรับงานตัด 1-3 คัท ใช้กับลวดไวร์คัทได้หลากหลาย เป็นที่ยอบรับและแพร่หลายในอุตสาหรรม แม่พิมพ์ ชิ้นส่วนยานยนต์ เครื่องจักรกลโลหะการ

Specification

Max. Work Piece Size L x W x H (mm) 765 x 535 x 215
Max. Work Piece Weight (kg) 400kg
X x Y stroke (mm) 350 x 250 mm
U x V Stroke (mm) 80 x 80 mm
Z stroke (mm) 220
Max. Water Level in Working Tank 220
Wire Spool Weigh (kg) 10kg
Foot Print (mm) 2750 x 2560 x 2120
Machine Weight (kg) 3000kg
Water System Capacity 850L
AU-500i
AU-500i Image

X/Y/Z : 500*300*300 mm.

เครื่องไวร์คัท AccuteX

AU Series wire cut machine

เครื่องวายคัท ประสิทธิภาพสูง การตัดชิ้นงานวายคัทที่รวดเร็ว รองรับงานตัด 1-3 คัท ใช้กับลวดวายคัทได้หลากหลาย เป็นที่ยอบรับและแพร่หลายในอุตสาหรรม แม่พิมพ์ ชิ้นส่วนยานยนต์ เครื่องจักรกลโลหะการ

Specification

Max. Work Piece Size L x W x H (mm) 990 x 560 x 265
Max. Work Piece Weight (kg) 400kg
X x Y stroke (mm) 500 x 300 mm
U x V Stroke (mm) 100 x 100 mm
Max. Water Level in Working Tank 270
Wire Spool Weigh (kg) 10kg
Foot Print (mm) 2950 x 2560 x 2210
Machine Weight (kg) 3600kg
Water System Capacity 850L
AU-560i
AU-560i Image

X/Y/Z : 560*360*300 mm.

เครื่องไวร์คัท AccuteX

AU Series wire cut machine

เครื่องวายคัท ประสิทธิภาพสูง การตัดชิ้นงานวายคัทที่รวดเร็ว รองรับงานตัด 1-3 คัท ใช้กับลวดวายคัทได้หลากหลาย เป็นที่ยอบรับและแพร่หลายในอุตสาหรรม แม่พิมพ์ ชิ้นส่วนยานยนต์ เครื่องจักรกลโลหะการ

Specification

Max. Work Piece Size L x W x H (mm) 990 x 560 x 295
Max. Work Piece Weight (kg) 500kg
X x Y stroke (mm) 560 x 360 mm
U x V Stroke (mm) 100 x 100 mm
Z Stroke (mm) 300
Max. Water Level in Working Tank 270
Wire Spool Weigh (kg) 10kg
Foot Print (mm) 2950 x 2560 x 2210
Machine Weight (kg) 3600kg
Water System Capacity 850L
AU-600i
AU-600i Image

X/Y/Z : 600*400*300 mm.

เครื่องไวร์คัท AccuteX

AU Series wire cut machine

เครื่องวายคัท ประสิทธิภาพสูง การตัดชิ้นงานวายคัทที่รวดเร็ว รองรับงานตัด 1-3 คัท ใช้กับลวดไวร์คัทได้หลากหลาย เป็นที่ยอบรับและแพร่หลายในอุตสาหรรม แม่พิมพ์ ชิ้นส่วนยานยนต์ เครื่องจักรกลโลหะการ

Specification

Max. Work Piece Size L x W x H (mm) 990 x 620 x 295
Max. Work Piece Weight (kg) 600kg
X x Y x Z stroke (mm) 600 x 400 x 300 mm
U x V Stroke (mm) 100 x 100 mm
Max. Water Level in Working Tank 270
Wire Spool Weigh (kg) 10kg
Foot Print (mm) 2950 x 2560 x 2210
Machine Weight (kg) 3700kg
Water System Capacity 850L
AU-750i
AU-750i Image

X/Y/Z : 750*500*300 mm.

เครื่องไวร์คัท AccuteX

AU Series wire cut machine

เครื่องวายคัท ประสิทธิภาพสูง การตัดชิ้นงานวายคัทที่รวดเร็ว รองรับงานตัด 1-3 คัท ใช้กับลวดไวร์คัทได้หลากหลาย เป็นที่ยอบรับและแพร่หลายในอุตสาหรรม แม่พิมพ์ ชิ้นส่วนยานยนต์ เครื่องจักรกลโลหะการ

Specification

Max. Work Piece Size L x W x H (mm) 1190 x 720 x 295
Max. Work Piece Weight (kg) 800kg
X x Y x Z stroke (mm) 750 x 500 x 300 mm
U x V Stroke (mm) 100 x 100 mm
Max. Water Level in Working Tank 300
Wire Spool Weigh (kg) 10kg
Foot Print (mm) 3260 x 3210 x 2300
Machine Weight (kg) 4300kg
Water System Capacity 1240L
AU-900i
AU-900i Image

X/Y/Z : 900*500*300 mm.

เครื่องไวร์คัท AccuteX

AU Series wire cut machine

เครื่องวายคัท ประสิทธิภาพสูง การตัดชิ้นงานวายคัทที่รวดเร็ว รองรับงานตัด 1-3 คัท ใช้กับลวดไวร์คัทได้หลากหลาย เป็นที่ยอบรับและแพร่หลายในอุตสาหรรม แม่พิมพ์ ชิ้นส่วนยานยนต์ เครื่องจักรกลโลหะการ

Specification

Max. Work Piece Size L x W x H (mm) 1350 x 760 x 295
Max. Work Piece Weight (kg) 800kg
X x Y x Z stroke (mm) 900 x 500 x 300 mm
U x V Stroke (mm) 100 x 100 mm
Max. Water Level in Working Tank 300
Wire Spool Weigh (kg) 10kg
Foot Print (mm) 3560 x 3050 x 2300
Machine Weight (kg) 5600kg
Water System Capacity 1240L
AU-860i
AU-860i Image

X/Y/Z : 800*600*400 mm.

เครื่องไวร์คัท AccuteX

AU Series wire cut machine

เครื่องวายคัท ประสิทธิภาพสูง การตัดชิ้นงานวายคัทที่รวดเร็ว รองรับงานตัด 1-3 คัท ใช้กับลวดไวร์คัทได้หลากหลาย เป็นที่ยอบรับและแพร่หลายในอุตสาหรรม แม่พิมพ์ ชิ้นส่วนยานยนต์ เครื่องจักรกลโลหะการ

Specification

Max. Work Piece Size L x W x H (mm) 1330 x 990 x 395
Max. Work Piece Weight (kg) 5000kg
X x Y stroke (mm) 800 x 600 mm
U x V Stroke (mm) 150 x 150 mm
Wire Spool Weigh (kg) 16kg
Foot Print (mm) 3900 x 3600 x 2740
Machine Weight (kg) 6500kg
Water System Capacity Main Tank 1630L
Sub Tank 1040L
AU-1000i
AU-1000i Image

X/Y/Z : 1000*650*400 mm.

เครื่องไวร์คัท AccuteX

AU Series wire cut machine

เครื่องวายคัท ประสิทธิภาพสูง การตัดชิ้นงานวายคัทที่รวดเร็ว รองรับงานตัด 1-3 คัท ใช้กับลวดไวร์คัทได้หลากหลาย เป็นที่ยอบรับและแพร่หลายในอุตสาหรรม แม่พิมพ์ ชิ้นส่วนยานยนต์ เครื่องจักรกลโลหะการ

Specification

Max. Workpiece Size (LxWxH) (mm) 1620x990x395
(Opt.H595)
Max. zxWorkpiece Weight( Kg) 5000kg
X/Y Stroke (mm) 1100 x 650 mm
U/V Stroke (mm) 150 x 150 mm
Z Stroke (mm) 400(Opt.Z600)
Max. Water Level in Working Tank (mm) 400(Opt.Z600)
Wire Spool Weight (kg) 16
Footprint(WxDxH) (mm) 4350x3600x2740
Water System Capacity (L) Main Tank/2420(Z400)
Main+Sub
Tank/1630+1280(Z600)
Machine Weight (kg) 8500
AU-1400i
AU-1400i Image

X/Y/Z : 1400*800*200 mm.

เครื่องไวร์คัท AccuteX

AU Series wire cut machine

เครื่องวายคัท ประสิทธิภาพสูง การตัดชิ้นงานวายคัทที่รวดเร็ว รองรับงานตัด 1-3 คัท ใช้กับลวดไวร์คัทได้หลากหลาย เป็นที่ยอบรับและแพร่หลายในอุตสาหรรม แม่พิมพ์ ชิ้นส่วนยานยนต์ เครื่องจักรกลโลหะการ

Specification

Max. Workpiece Size (LxWxH) (mm) 1740x1080x195
Max. zxWorkpiece Weight( Kg) 4000kg
X/Y Stroke (mm) 1400 x 800 mm
U/V Stroke (mm) 150 x 150 mm
Z Stroke (mm) 200(Opt.Z600)
Max. Water Level in Working Tank (mm) 200(Opt.Z600)
Wire Spool Weight (kg) 16
Footprint(WxDxH) (mm) 4250x3750x2450
Water System Capacity (L) 2420
Machine Weight (kg) 8600
AU-1400i Z800
AU-1400i Z800 Image

X/Y/Z : 1400*800*800 mm.

เครื่องไวร์คัท AccuteX

AU Series wire cut machine

เครื่องวายคัท ประสิทธิภาพสูง การตัดชิ้นงานวายคัทที่รวดเร็ว รองรับงานตัด 1-3 คัท ใช้กับลวดไวร์คัทได้หลากหลาย เป็นที่ยอบรับและแพร่หลายในอุตสาหรรม แม่พิมพ์ ชิ้นส่วนยานยนต์ เครื่องจักรกลโลหะการ

Specification

Max. Workpiece Size (LxWxH) (mm) 1790x1080x795
Max. zxWorkpiece Weight( Kg) 10000kg
X/Y Stroke (mm) 1400 x 800 mm
U/V Stroke (mm) 150 x 150 mm
Z Stroke (mm) 800
Max. Water Level in Working Tank (mm) 800
Wire Spool Weight (kg) 16
Footprint(WxDxH) (mm) 5120x4050x3400
Water System Capacity (L) Main+Sub Tank/2000+1466
Machine Weight (kg) 9500
AL-400SA
AL-400SA Image

X/Y/Z : 400*300*220 mm.

เครื่องไวร์คัท AccuteX

AL series Linear Shaft Motor

Rapid servo control, enhancement of sensitivity in discharge gap control. Improving cutting speed up to 8~10%

1/1000 High Resolution Signal Process

High resolution in linear scale, achieve more smooth velocity control, and enhance the stability of position control, best match up contouring accuracy.

Stable Discharge Board (SD-Master)

Irregular Thickness Cutting

The AccuteX intelligent discharge unit is capable of dealing with the changing conditions in workpiece thickness and water flushing situations, featuring high cutting speed, and free from wire breaking problems.

PCD Cutting & Graphite Machining Power supply

The collapse of workpiece edge by wire cut can be controlled within minimum range along with high speed machining.

Specification :

Max. Work Piece Size L x W x H (mm) 790x610x215
Max. Work Piece Weight (kg) 400kg
X x Y stroke (mm) 400 x 300 mm
U x V Stroke (mm) 100 x 100 mm
Z Stroke (mm) 220
Max. Cutting Taper(H=100) ±21°
Wire Spool Weight (Kg) 10
Footprint (mm)W x D x H 2051 x 2990 x 2070
Water System Capacity (L) 630
Machine Weight (Kg) 300

 

(*)To acquire the optimum stable cutting performance,the suggested-maximum height of cutting workpiece is the Z axis stroke minus 30mm.

AL-500SA
AL-500SA Image

X/Y/Z : 500*300*300 mm.

เครื่องไวร์คัท AccuteX

AL series Linear Shaft Motor

Rapid servo control, enhancement of sensitivity in discharge gap control. Improving cutting speed up to 8~10%

1/1000 High Resolution Signal Process

High resolution in linear scale, achieve more smooth velocity control, and enhance the stability of position control, best match up contouring accuracy.

Stable Discharge Board (SD-Master)

Irregular Thickness Cutting

The AccuteX intelligent discharge unit is capable of dealing with the changing conditions in workpiece thickness and water flushing situations, featuring high cutting speed, and free from wire breaking problems.

PCD Cutting & Graphite Machining Power supply

The collapse of workpiece edge by wire cut can be controlled within minimum range along with high speed machining.

Specification :

Max. Workpiece SizeL x W x H (mm) 990x560x295
Max. Workpiece Weight (Kg) 500
X/Y Stroke (mm) 500×300
U/V Stroke (mm) 100×100
Z Stroke (mm) 300
Max. Cutting Taper (H=100) ±21°
Wire Spool Weight (Kg) 10
Footprint (mm)W x D x H 2480x2980x2210
Water System Capacity (L) 900
Machine Weight (Kg) 3600

(*)To acquire the optimum stable cutting performance,the suggested-maximum height of cutting workpiece is the Z axis stroke minus 30mm.

AL-560SA
AL-560SA Image

X/Y/Z : 560*360*300 mm.

เครื่องไวร์คัท AccuteX

AL series Linear Shaft Motor

Rapid servo control, enhancement of sensitivity in discharge gap control. Improving cutting speed up to 8~10%

1/1000 High Resolution Signal Process

High resolution in linear scale, achieve more smooth velocity control, and enhance the stability of position control, best match up contouring accuracy.

Stable Discharge Board (SD-Master)

Irregular Thickness Cutting

The AccuteX intelligent discharge unit is capable of dealing with the changing conditions in workpiece thickness and water flushing situations, featuring high cutting speed, and free from wire breaking problems.

PCD Cutting & Graphite Machining Power supply

The collapse of workpiece edge by wire cut can be controlled within minimum range along with high speed machining.

Specification :

Max. Workpiece SizeL x W x H (mm) 990x560x295
Max. Workpiece Weight (Kg) 500
X/Y Stroke (mm) 560×360
U/V Stroke (mm) 100×100
Z Stroke (mm) 300
Max. Cutting Taper(H=100) ±21°
Wire Spool Weight (Kg) 10
Footprint (mm)W x D x H 2480x2980x2210
Water System Capacity (L) 900
Machine Weight (Kg) 3600


(*)To acquire the optimum stable cutting performance,the suggested-maximum height of cutting workpiece is the Z axis stroke minus 30mm.

AL-600SA
AL-600SA Image

X/Y/Z : 600*400*300 mm.

เครื่องไวร์คัท AccuteX

AL series Linear Shaft Motor

Rapid servo control, enhancement of sensitivity in discharge gap control. Improving cutting speed up to 8~10%

1/1000 High Resolution Signal Process

High resolution in linear scale, achieve more smooth velocity control, and enhance the stability of position control, best match up contouring accuracy.

Stable Discharge Board (SD-Master)

Irregular Thickness Cutting

The AccuteX intelligent discharge unit is capable of dealing with the changing conditions in workpiece thickness and water flushing situations, featuring high cutting speed, and free from wire breaking problems.

PCD Cutting & Graphite Machining Power supply

The collapse of workpiece edge by wire cut can be controlled within minimum range along with high speed machining.

Specification :

Max. Workpiece SizeL x W x H (mm) 990x560x295
Max. Workpiece Weight (Kg) 550
X/Y Stroke (mm) 600×400
U/V Stroke (mm) 100×100
Z Stroke (mm) 300
Max. Cutting Taper (H=100) ±21°
Wire Spool Weight (Kg) 10
Footprint (mm)W x D x H 2480x2980x2210
Water System Capacity (L) 900
Machine Weight (Kg) 3700

(*)To acquire the optimum stable cutting performance,the suggested-maximum height of cutting workpiece is the Z axis stroke minus 30mm.

AL-750SA
AL-750SA Image

X/Y/Z : 750*500*300 mm.

เครื่องไวร์คัท AccuteX

AL series Linear Shaft Motor

Rapid servo control, enhancement of sensitivity in discharge gap control. Improving cutting speed up to 8~10%

1/1000 High Resolution Signal Process

High resolution in linear scale, achieve more smooth velocity control, and enhance the stability of position control, best match up contouring accuracy.

Stable Discharge Board (SD-Master)

Irregular Thickness Cutting

The AccuteX intelligent discharge unit is capable of dealing with the changing conditions in workpiece thickness and water flushing situations, featuring high cutting speed, and free from wire breaking problems.

PCD Cutting & Graphite Machining Power supply

The collapse of workpiece edge by wire cut can be controlled within minimum range along with high speed machining.

Specification :

Max. Workpiece SizeL x W x H (mm) 1190x720x295
Max. Workpiece Weight (Kg) 750
X/Y Stroke (mm) 750×500
U/V Stroke (mm) 100×100
Z Stroke (mm) 300
Max. Cutting Taper (H=100) ±21°
Wire Spool Weight (Kg) 10
Footprint (mm)W x D x H 3000x3200x2250
Water System Capacity (L) 1060
Machine Weight (Kg) 4300


(*)To acquire the optimum stable cutting performance,the suggested-maximum height of cutting workpiece is the Z axis stroke minus 30mm.

DK Series
DK Series Image

เครื่องไวร์คัท FANGZHENG

ใช้ลวด Molybdenum ประหยัด ต้นทุนเดินเครื่อง

Feature :

1.Linear rail, Four axes independent UV work,

2.Work pieces to 600mm thick.

3.Taper angle up to ± 30°.

4.Small wire diameters 0.12- 0.22 mm  (down to 0 .08mm).

5.Accuracy: 0.01mm, even 0.005mm.

6.Roughness: Ra 0.8~1.6 µm

7.Low consumption, material saving.

8.Closed loop glass scales on all four axes for positional accuracy of 0.005mm.

9.Advanced CAD/CAM software with file transfer and translation capabilities.

10.Control system with luxury cabinet. ( HL, HF, W-Cut, A-Cut) .
11.  Enclosed cover for   protection.

Optional:

Taper cutting accessory. (± 15°, ± 30°.)

Model DK7720 DK7725 DK7732(35) DK7740(45) DK7740J DK7750 DK7750J
Working Table size  (mm) 490*380 580*400 700*440 780*540 1000*540 1000*650 1140*650
Stroke(X/Y/)(mm) 250*200 320*250 400*320 500*400 630*400 630*500 800*500
Max.Z axis travel(mm) 350 350 400 400 400 600 600
Cutting angle(°/80mm) 6° 15° 6° 15° 30° 6° 15° 30° 6° 15° 30° 6° 15° 30°
Max.cutting speed(mm²/min) ≥90(High speed≥140)
Optimum roughness(m) ≤2.5(Medium speed≤1.0)
Dia. of molybdenum wire(mm) 0.1-0.3( recommend 0.18)
Molybdenum wire moving speed(m/s) 11.5
Working coolant DX-1, DX-4, NG-1
Process accuracy (mm) 0.01-0.015
Feeding Pulse equivalent (mm) 0.001
Power supply single phase, 220V/50Hz,  three phase, 380V/50Hz
Power consumption( Kw) <1.0
Max.workpiece weight(kg) 200 250 300 450 450 700 700
Weight(kg) 800 900 1200 1350 1400 2100 2300
Dimension(m) 1.2*0.9*1.3 1.3*1.2*1.4 1.3*1.2*1.4 1.6*1.3*1.5 1.6*1.3*1.5 1.8*1.6*1.7 1.8*1.6*1.7
Packing size(m) 1.3*0.9*1.4 1.4*1.2*1.5 1.6*1.3*1.7 1.9*1.4*1.8 1.9*1.4*1.8 1.9*1.6*2.1 1.9*1.6*2.1
All the specification is only for reference,  for detailed technical data please check with our sales engineer, Fazheng hold the authority of improving the design and specification of the products without notice in advance.
FZC series
FZC series Image

เครื่องไวร์คัท FANGZHENG

ใช้ลวด Molybdenum ประหยัด ต้นทุนเดินเครื่อง

Feature :

EDM Wire Machine FZC Series( 7732,774 0,7750,7 763)

Fangzhe ng has produced the EDM wire cut machine for more than 1 5 year, developed new technolo gy of CNC wire cut EDM continuou sly.

FZC is the new gene ration middle speed control EDM machine, which can repla ce the Low speed EDM machine.

Advanta ges:

“C” structure column design, machine h ead is installed in vertical direction, there will be no wire swi ng during wire feeding.

  • “T” shape machine bed with 6 support p oints to make sure rigidity of whole machine, Hi h Grade

casting was proc essed by An nealing and ageing treatment . Cross design X,Y axle carria ge alw ays move within range of “T” machi ne.

  • All X, Y, U, V a xles use HI WIN linear g uide rail, the rail for mo lybdenum w ire moving also is HIW IN linear g uide rail .
  • All are stepper motor, Servo motor is op tinal.
  • With automatic wire tension mechanism, keep the wi re moving m ore stable.
  • Wi th Diamond nozzle for g uiding the wire.
  • Adjustable guid er to make s ure the wire is perpendicular to the work piece by the motor for lifting and lowering.
  • Dat a I/O: Keyboard, USB.
  • Different control software; HF, HL, W- cut, A-cut.
  • Fangzheng pate nded Control cabinet, with Double CPU. All parameter can b e edited when it is machining, save a time for w aiting.
  • With Readout in dicator to se e the positio n directly.
  • Equipped with h igh pressure coolant tan k, with double filter for s mooth surface cutting.All these design lead to leading performan ce in gettin g good surf ace finish of cut parts. Roughness: Ra1.0;  Accuracy: +/-0.004mm.The Discharge w ave can sho wed on the screen, automatic tracin g.Real-time tack the process, c an machine 3D products .

EDM Drill
DZNC S2025
DZNC S2025 Image

XYZ axes travel: 250x200x350 mm

HCM

EDM drill machine

DZNC S2025

 

Machine Features
1. Oscillation output is controlled by a micro-computer, achieving accurate fine machining at high speed.
2. The operator only needs to input the working current. The other working parameters will be generated automatically.
3. The working fluid is water–pollution free.
4. Machining parameter can be altered during machining.
5. Machining at high speed or at a low rate of electrode wear can be chosen according to specific needs.
6. It’s idea for machining on hard alloy and various type of surface like spherical, curved and inclined.
7. The machine is capable of retaining data in case of a power outage. All machining data and position values are stored automatically when a power failure occurs.
8. In case of power outage, this machine prevents data loss for up to ten years.
9. The controller allows machining depth setting.

Specification

Work table: 450x210mm
Max. Workpiece: 630x430x160 mm
Max. Workpiece weight: 500 kg
Distance from table to guide plate: 0-190 mm
Machine dimensions: 950x1140x2000 mm
Machine net weight: 600 kg
Electrode diameter: 0.2~3.0 mm
Dielectric fluid: Pure water (oil for drilling bellow 0.2 mm)
Working fluid tank capacity: 20 liters
Filtration: paper filter

DZNC S3025
DZNC S3025 Image

XYZ axes travel: 300x250x350 mm

HCM

EDM drill machine

DZNC S3025

 

Machine Features
1. Oscillation output is controlled by a micro-computer, achieving accurate fine machining at high speed.
2. The operator only needs to input the working current. The other working parameters will be generated automatically.
3. The working fluid is water–pollution free.
4. Machining parameter can be altered during machining.
5. Machining at high speed or at a low rate of electrode wear can be chosen according to specific needs.
6. It’s idea for machining on hard alloy and various type of surface like spherical, curved and inclined.
7. The machine is capable of retaining data in case of a power outage. All machining data and position values are stored automatically when a power failure occurs.
8. In case of power outage, this machine prevents data loss for up to ten years.
9. The controller allows machining depth setting.

Specification

XYZ axes travel: 300x250x350mm
U axis travel: 200 mm
Work table: 600×300 mm
Max. Workpiece: 850x530x300mm
Max. Workpiece weight: 800 kg
Distance from table to guide plate: 0~350 mm
Machine dimensions: 900x1140x2200mm
Machine net weight: 1000 kg
Electrode diameter: 0.2~3.0 mm
Dielectric fluid: Pure water (oil for drilling bellow 0.2mm)
Working fluid tank capacity: 20 liters
Filtration: paper filter
DZNC S4030
DZNC S4030 Image

XYZ axes travel: 400x300x350 mm

HCM

EDM drill machine

DZNC S4030

 

Machine Features
1. Oscillation output is controlled by a micro-computer, achieving accurate fine machining at high speed.
2. The operator only needs to input the working current. The other working parameters will be generated automatically.
3. The working fluid is water–pollution free.
4. Machining parameter can be altered during machining.
5. Machining at high speed or at a low rate of electrode wear can be chosen according to specific needs.
6. It’s idea for machining on hard alloy and various type of surface like spherical, curved and inclined.
7. The machine is capable of retaining data in case of a power outage. All machining data and position values are stored automatically when a power failure occurs.
8. In case of power outage, this machine prevents data loss for up to ten years.
9. The controller allows machining depth setting.

Specification

XYZ axes travel: 400x300x350 mm
U axis travel: 200 mm
Work table: 650×400 mm
Max. Workpiece: 1000x600x300 mm
Max. Workpiece weight: 1000 kg
Distance from table to guide plate: 0~350 mm
Machine dimensions: 1200x1600x2100 mm
Machine net weight: 1520 kg
Electrode diameter: 0.2~3.0 mm
Dielectric fluid: Pure water (oil for drilling bellow 0.2 mm)
Working fluid tank capacity: 20 liters
Filtration: paper filter
DZNC S5040
DZNC S5040 Image

XYZ axes travel : 500x400x350 mm

HCM

EDM drill machine

DZNC S4030

 

Machine Features
1. Oscillation output is controlled by a micro-computer, achieving accurate fine machining at high speed.
2. The operator only needs to input the working current. The other working parameters will be generated automatically.
3. The working fluid is water–pollution free.
4. Machining parameter can be altered during machining.
5. Machining at high speed or at a low rate of electrode wear can be chosen according to specific needs.
6. It’s idea for machining on hard alloy and various type of surface like spherical, curved and inclined.
7. The machine is capable of retaining data in case of a power outage. All machining data and position values are stored automatically when a power failure occurs.
8. In case of power outage, this machine prevents data loss for up to ten years.
9. The controller allows machining depth setting.

Specification

XYZ axes travel: 500x400x350 mm
U axis travel: 200 mm
Work table: 800×450 mm
Max. Workpiece: 1200x700x300mm
Max. Workpiece weight: 1000 kg
Distance from table to guide plate: 0~350mm
Machine dimensions: 1400x1700x2100mm
Machine net weight: 1600 kg
Electrode diameter: 0.2~3.0mm
Dielectric fluid: Pure water (oil for drilling bellow 0.2mm)
Working fluid tank capacity: 20 liters
Filtration: paper filter

※Tilting head spindle ±45°(Option)

DD703
DD703 Image

Mainly used for processing unmanageable deep pinhole such as threading hole,
drilling hole on ultra-hard conducting material for  wire cutting on, nozzle opening of oil pump,
spinneret orifice of spinning die, oil way of hydropneumatic components and cooling hole of engine.

1.Drilling diameter from 0.3mm to 3mm. The maximum depth ratio could be 300:1.

2.Auto deep control, blind hole can also be maken.

3.Precision ( hole straightness) is less than 0.04 mm.

4.Can drill on oblique and curved surface directly.

5.Digital readout 3 axis (X, Y, Z).

6.Fast processing speed and low consumption.

7.Can use water as coolant, low cost and no pollution.

 

Model DD703 DD703.30

Electrode diameter(mm)

Φ0.3-Φ3.0

Φ0.3-Φ3.0

Spindle stroke(mm)

200

200

Servo stroke(mm)

300

300

Max.adjusting speed of spindle(mm)

200

200

Turn head (C axis)speed(mm/min)

20-120

20-120

Working table size(mm)

260×380

360×480

X-Y(mm)

200×300

300×400

Max.distance between working table and guide apparatus(mm)

300

300

Height of working table(mm)

920

920

Max.process current(A)

30

30

Max.output power(W)

2.5

2.5

Power (V/Hz)

380/50

380/50

Capacity of working fluid (L)

25

25

Max.pressure of working fluid(MPa)

7

7

Dimension(L×W×H)(mm)

1060×750×1700

1060×750×1700

Weight(kg)

600

600

 

DD703.40
DD703.40 Image

Mainly used for processing unmanageable deep pinhole such as threading hole,
drilling hole on ultra-hard conducting material for  wire cutting on, nozzle opening of oil pump,
spinneret orifice of spinning die, oil way of hydropneumatic components and cooling hole of engine.

1.Drilling diameter from 0.3mm to 3mm. The maximum depth ratio could be 300:1.

2.Auto deep control, blind hole can also be maken.

3.Precision ( hole straightness) is less than 0.04 mm.

4.Can drill on oblique and curved surface directly.

5.Digital readout 3 axis (X, Y, Z).

6.Fast processing speed and low consumption.

7.Can use water as coolant, low cost and no pollution.

 

Model Working table size X/Y stroke Spindle stroke Servo stroke Speed of rotating head Max.distance between working table and guide apparatus Weight

Dimension

DD703.40 1000×540mm 400×630mm 400mm 300mm 20-120rpm 350mm 1400kg 1600×1300×1500mm

DD703.50

1000×700mm

500×630mm

500mm

600mm

20-120rpm

500mm

2500kg

1950×1500×1600mm

CNC Machining Center Vertical / Horizontal
A650 - A750 Linear Way Image
A650 - A750 Linear Way
A650 tratel X/Y/Z : 650*410*510 mm. A1000 travel X/Y/Z : 750*460*540 mm. WINNER CNC Machining Center Features Easy chip flow splash guard design. High speed linear guide used on 3-axes of machine, ... อ่านต่อ
A850 - A1000 Linear Way Image
A850 - A1000 Linear Way
A850 tratel X/Y/Z : 850*560*560 mm. A750 travel X/Y/Z : 1000*600*600 mm. WINNER CNC Machining Center Features Easy chip flow splash guard design. High speed linear guide used on 3-axes of machine, ... อ่านต่อ
D850 - D1000 Box Way Image
D850 - D1000 Box Way
A850 tratel X/Y/Z : 850*560*560 mm. A750 travel X/Y/Z : 1000*560*560 mm. WINNER CNC Machining Center Features Easy chip flow splash guard design. High speed linear guide used on 3-axes of machine, ... อ่านต่อ
E1100 - E1300 Linear Way Image
E1100 - E1300 Linear Way
E1000 tratel X/Y/Z : 1000*600*600 mm. E1300 travel X/Y/Z : 1300*700*700 mm. WINNER CNC Machining Center Features Easy chip flow splash guard design. High speed linear guide used on 3-axes of machin... อ่านต่อ
L1600 - L1800 Box Way Image
L1600 - L1800 Box Way
L16000 tratel X/Y/Z : 1600*720*760 mm. L1800 travel X/Y/Z : 1800*900*800 mm. WINNER CNC Machining Center Features Precision ground slide ways & Turcite-B coated on 3-axes for box way & gibs. ... อ่านต่อ
AP-500 Tapping / Drilling Image
AP-500 Tapping / Drilling
AP-500 tratel X/Y/Z : 500*400*300 mm. WINNER Tapping / Drilling CNC Machining Center Features Easy chip flow splash guard design. High speed linear guide used on 3-axes of machine, accomplish super load capa... อ่านต่อ
APC-500/APC-600 Tapping / Drilling Image
APC-500/APC-600 Tapping / Drilling
AP-500 tratel X/Y/Z : 500*400*300 mm. WINNER Tapping / Drilling CNC Machining Center Features A space-saving, high-precision and high-performance two pallets change. APC series with automatic pallet change c... อ่านต่อ
HSMC-600/800/1000 Image
HSMC-600/800/1000
HSMC tratel X/Y/Z : 600*600*380 mm. HSMC tratel X/Y/Z : 800*600*480 mm. HSMC tratel X/Y/Z : 1000*700*480 mm. WINNER High speed CNC Machining Center Features Built-In t... อ่านต่อ
Wire Cut
Promotion
GE-43S Image
GE-43S
X/Y/Z : 400*300*220 mm. เครื่องไวร์คัท AccuteX GE series wire cut machine Features: -Best cost & performance ratio machine -Cutting speed is superior to other competitors -Y-axis is located on the base; X-axis is loca... อ่านต่อ
฿ 2,400,000฿ 1,890,000
GE-53S Image
GE-53S
X/Y/Z : 500*300*220 mm. เครื่องไวร์คัท AccuteX GE series wire cut machine Features: -Best cost & performance ratio machine -Cutting speed is superior to other competitors -Y-axis is located on the base; X-axis is loca... อ่านต่อ
GA-43AL Image
GA-43AL
X/Y/Z : 400*300*220 mm. เครื่องไวร์คัท AccuteX GA Series ออกแบบด้วยแนวคิดแบบ ลิเนียร์ มอเตอร์ เพื่อความเที่ยงตรง โต... อ่านต่อ
GA-53AL Image
GA-53AL
X/Y/Z : 500*300*220 mm. เครื่องไวร์คัท AccuteX GA Series ออกแบบด้วยแนวคิดแบบ ลิเนียร์ มอเตอร์ เพื่อความเที่ยงตรง โต... อ่านต่อ
AU-300i Image
AU-300i
X/Y/Z : 350*250*220 mm. เครื่องไวร์คัท AccuteX AU Series wire cut machine เครื่องวายคัท ประสิทธิภาพสูง การตัดชิ้นงานวายคัทที่รวดเร็?... อ่านต่อ
AU-500i Image
AU-500i
X/Y/Z : 500*300*300 mm. เครื่องไวร์คัท AccuteX AU Series wire cut machine เครื่องวายคัท ประสิทธิภาพสูง การตัดชิ้นงานวายคัทที่รวดเร็?... อ่านต่อ
AU-560i Image
AU-560i
X/Y/Z : 560*360*300 mm. เครื่องไวร์คัท AccuteX AU Series wire cut machine เครื่องวายคัท ประสิทธิภาพสูง การตัดชิ้นงานวายคัทที่รวดเร็?... อ่านต่อ
AU-600i Image
AU-600i
X/Y/Z : 600*400*300 mm. เครื่องไวร์คัท AccuteX AU Series wire cut machine เครื่องวายคัท ประสิทธิภาพสูง การตัดชิ้นงานวายคัทที่รวดเร็?... อ่านต่อ
AU-750i Image
AU-750i
X/Y/Z : 750*500*300 mm. เครื่องไวร์คัท AccuteX AU Series wire cut machine เครื่องวายคัท ประสิทธิภาพสูง การตัดชิ้นงานวายคัทที่รวดเร็?... อ่านต่อ
AU-900i Image
AU-900i
X/Y/Z : 900*500*300 mm. เครื่องไวร์คัท AccuteX AU Series wire cut machine เครื่องวายคัท ประสิทธิภาพสูง การตัดชิ้นงานวายคัทที่รวดเร็?... อ่านต่อ
AU-860i Image
AU-860i
X/Y/Z : 800*600*400 mm. เครื่องไวร์คัท AccuteX AU Series wire cut machine เครื่องวายคัท ประสิทธิภาพสูง การตัดชิ้นงานวายคัทที่รวดเร็?... อ่านต่อ
AU-1000i Image
AU-1000i
X/Y/Z : 1000*650*400 mm. เครื่องไวร์คัท AccuteX AU Series wire cut machine เครื่องวายคัท ประสิทธิภาพสูง การตัดชิ้นงานวายคัทที่รวดเร็... อ่านต่อ
AU-1400i Image
AU-1400i
X/Y/Z : 1400*800*200 mm. เครื่องไวร์คัท AccuteX AU Series wire cut machine เครื่องวายคัท ประสิทธิภาพสูง การตัดชิ้นงานวายคัทที่รวดเร็... อ่านต่อ
AU-1400i Z800 Image
AU-1400i Z800
X/Y/Z : 1400*800*800 mm. เครื่องไวร์คัท AccuteX AU Series wire cut machine เครื่องวายคัท ประสิทธิภาพสูง การตัดชิ้นงานวายคัทที่รวดเร็... อ่านต่อ
AL-400SA Image
AL-400SA
X/Y/Z : 400*300*220 mm. เครื่องไวร์คัท AccuteX AL series Linear Shaft Motor Rapid servo control, enhancement of sensitivity in discharge gap control. Improving cutting speed up to 8~10% 1/1000 High Resolution Signal Process High r... อ่านต่อ
AL-500SA Image
AL-500SA
X/Y/Z : 500*300*300 mm. เครื่องไวร์คัท AccuteX AL series Linear Shaft Motor Rapid servo control, enhancement of sensitivity in discharge gap control. Improving cutting speed up to 8~10% 1/1000 High Resolution Signal Process High r... อ่านต่อ
AL-560SA Image
AL-560SA
X/Y/Z : 560*360*300 mm. เครื่องไวร์คัท AccuteX AL series Linear Shaft Motor Rapid servo control, enhancement of sensitivity in discharge gap control. Improving cutting speed up to 8~10% 1/1000 High Resolution Signal Process High r... อ่านต่อ
AL-600SA Image
AL-600SA
X/Y/Z : 600*400*300 mm. เครื่องไวร์คัท AccuteX AL series Linear Shaft Motor Rapid servo control, enhancement of sensitivity in discharge gap control. Improving cutting speed up to 8~10% 1/1000 High Resolution Signal Process High r... อ่านต่อ
AL-750SA Image
AL-750SA
X/Y/Z : 750*500*300 mm. เครื่องไวร์คัท AccuteX AL series Linear Shaft Motor Rapid servo control, enhancement of sensitivity in discharge gap control. Improving cutting speed up to 8~10% 1/1000 High Resolution Signal Process High r... อ่านต่อ
DK Series Image
DK Series
เครื่องไวร์คัท FANGZHENG ใช้ลวด Molybdenum ประหยัด ต้นทุนเดินเครื่อง Feature : 1.Linear rail, Four axes independent UV work, 2.Work pieces to 600mm thick. 3.Taper angle... อ่านต่อ
FZC series Image
FZC series
เครื่องไวร์คัท FANGZHENG ใช้ลวด Molybdenum ประหยัด ต้นทุนเดินเครื่อง Feature : EDM Wire Machine FZC Series( 7732,774 0,7750,7 763) Fangzhe ng has produced t... อ่านต่อ
EDM Drill
DZNC S2025 Image
DZNC S2025
XYZ axes travel: 250x200x350 mm HCM EDM drill machine DZNC S2025   Machine Features 1. Oscillation output is controlled by a micro-computer, achieving accurate fine mac... อ่านต่อ
DZNC S3025 Image
DZNC S3025
XYZ axes travel: 300x250x350 mm HCM EDM drill machine DZNC S3025   Machine Features 1. Oscillation output is controlled by a micro-computer, achieving accurate fine mac... อ่านต่อ
DZNC S4030 Image
DZNC S4030
XYZ axes travel: 400x300x350 mm HCM EDM drill machine DZNC S4030   Machine Features 1. Oscillation output is controlled by a micro-computer, achieving accurate fine mac... อ่านต่อ
DZNC S5040 Image
DZNC S5040
XYZ axes travel : 500x400x350 mm HCM EDM drill machine DZNC S4030   Machine Features 1. Oscillation output is controlled by a micro-computer, achieving accurate fine ma... อ่านต่อ
DD703 Image
DD703
Mainly used for processing unmanageable deep pinhole such as threading hole, drilling hole on ultra-hard conducting material for  wire cutting on, nozzle opening of oil pump, spinneret orifice of spinning die, oil way of hydropneumatic components and cooling hole of engine. 1... อ่านต่อ
DD703.40 Image
DD703.40
Mainly used for processing unmanageable deep pinhole such as threading hole, drilling hole on ultra-hard conducting material for  wire cutting on, nozzle opening of oil pump, spinneret orifice of spinning die, oil way of hydropneumatic components and cooling hole of engine. 1... อ่านต่อ